Kendal Lighting RK70-SN Instrukcja Obsługi Pobierz pdf

*WARNING:RISK OF FIRE AND ELECTRIC SHOCK.THIS PRODUCT REQUIRES

PROPER FIELD WIRING AND IS INTENDED TO BE INSTALLED BY A QUALIFIE

ELECTRICIAN ONLY.

ITEM NO.: RK70

IMPORTANT SAFETY INSTRUCTIONS

Important: When replacing Gu10 bulbs, be sure the Wattage of the bulb is 50W or less. Using higher wattag

bulb may damage the fixtures.

CAUTION: To reduce the risk of fire, the bare conductors shall be installed a minimum 7 feet from the ground

and minimum 6 inches from the ceiling or curtains.

CAUTION: Hot surface, keep away from curtains and combustible materials.

CAUTION: Risk of burn, before energizing, ensure that the bare conductors are free from any metallic objects

not part of this lighting system.

When installing or using the lighting system, basic safety precautions should always be followed including the

following.

1). Read all instructions.

2). Do not conceal or extend bus-bar conductors through a building wall.

3). Do not install this system in damp or wet locations.

not

install

this

system

damp

wet

locations

4). Do not install any part of this system less than 7 feet above floor.

5). To reduce the risk of fire and overheating, make sure all connections are tight.

6). To reduce the risk of fire and burns, do not install this lighting system where the uninsulated open bus-bar

conductors can be shorted or contact conductive materials.

7). Do not install any luminaire closer than 6 inches from any curtain, or similar combustible materials.

8). Turn off electrical power before modifying the light system in any way,or during re-lamping.

Caution: To reduce risk of fire, use only the type of lamp and maximum wattage marked on the fixtures

Caution: To reduce risk of fire, do not use lamps identified for use in enclosed fixtures.

Caution: Indoor use.

Caution: Use only type GU10, rated 120 volts, 50W maximum.

*Please inform your dealer immediately in case of any parts shortage.

*Save these instructions for future reference.

ITEM NO.: RK70

1 2 3

Podsumowanie treści

Strona 1 - IMPORTANT SAFETY INSTRUCTIONS

*WARNING:RISK OF FIRE AND ELECTRIC SHOCK.THIS PRODUCT REQUIRES PROPER FIELD WIRING AND IS INTENDED TO BE INSTALLED BY A QUALIFIEDELECTRICIAN ONLY.ITEM

Strona 2 - ASSEMBLY INSTRUCTIONS:

ASSEMBLY INSTRUCTIONS:Please carefully unpack and place all lamp parts on a flat surface.Step1: WARNING: TO PREVENT ELECTRICAL SHOCK TURN OFF POWER TO

Strona 3

ITEM NO.: RK70 adaptor. These two must be lined up with each other foreasy assembly. Once lined up push down on cap and turn clockwise.installing rail

Komentarze do niniejszej Instrukcji

Brak uwag

Kendal Lighting RK70-SN Instrukcja Obsługi

Przeglądaj online lub pobierz Instrukcja Obsługi dla Nie Kendal Lighting RK70-SN. Kendal Lighting RK70-SN Instructions / Assembly Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Nie Kendal Lighting RK70-SN